Shure SM58 for Podcasting: Is a Handheld Dynamic Vocal Mic a Good Choice?

Podcasting · October 12, 2026 · 5 min read

Can you use a Shure SM58 for podcasting?

Yes. The Shure SM58 Pro XLR Dynamic Vocal Microphone is a handheld dynamic microphone with a cardioid pickup pattern, and its listing describes it as suitable for live singing, speech, studio recording and podcasting. If you are searching for an answer to “Shure SM58 for podcasting”, the short version is that it is a sound, widely used choice, provided your setup can supply what it needs.

This guide explains how its design behaves on spoken word, what it requires from your interface or mixer, and who is better served by something else.

What the design means for spoken word

The SM58 is a dynamic (moving coil) microphone with a built-in spherical pop and wind filter. Dynamic microphones tend to pick up less of the room around you than condensers, which is why they are popular in untreated spaces such as bedrooms and spare rooms. The cardioid pattern favours sound from the front and rejects sound from the sides and rear, so a close-talking voice stands out from background noise.

The listing also notes a frequency response tailored for vocals, with a brightened midrange and bass roll-off. In practice that supports clear speech and helps limit low-frequency rumble. If you want to understand the trade-offs in more depth, read our guide to dynamic vs condenser microphones.

What it needs from your setup

The SM58 connects by XLR, so it needs an audio interface or a mixer. The listing flags that its output is low and that it needs a clean, high-gain preamp. Before buying, compare the microphone’s requirements with the gain range stated in your interface or mixer documentation. Not sure which to pick? Our article on audio interface vs mixer explains the difference.

One option on our site is the Behringer TUBE ULTRAGAIN MIC500USB, a tube preamp with a built-in USB audio interface. Check the manufacturer’s gain specification before pairing it with any dynamic microphone, rather than assuming it will suit.

Mounting and handling

Because it is a handheld model, you will want to fix it in place for a podcast. A desk stand or a microphone boom arm keeps the capsule at a steady distance from your mouth, which keeps the tone consistent. Our guide to choosing a boom arm covers weight, reach and mounting. Check what mounting hardware is included in the listing, since you may need a stand adapter or clip.

Avoid holding the microphone while recording, because handling creates thumps that travel through the body of the microphone.

Limitations to know about

The listing notes a limited high-frequency range, up to 15 kHz, compared with condenser microphones. For many voices this is not a problem, but if you want a very detailed, airy sound in a quiet treated room, a condenser may suit you better. Its low output also means a weak preamp can introduce noise when you turn the gain up.

SM58 or a USB microphone?

A USB microphone such as the Blue Yeti plugs straight into a computer and needs no interface. The SM58 costs less in complexity only if you already own an interface; otherwise you must buy one. Choose the SM58 if you want an XLR setup you can grow, and a USB model if you want to start recording within minutes. Our XLR vs USB guide compares both routes.

Getting a good sound from a dynamic microphone

Distance and angle shape the result more than any other setting. Keep the grille a few fingers’ width from your mouth and slightly off to one side, then keep that position consistent. Moving closer increases bass, a behaviour called the proximity effect, which flatters many voices but can sound boomy if you lean in too far.

Set your gain with normal speech peaks comfortably below the maximum, leaving headroom for laughter or louder moments. Because the microphone has a low output, you will use more gain than with a condenser, so listen for hiss on playback. If the noise rises as you add gain, the preamp may be the limiting factor, not the microphone.

A simple setup checklist

A basic SM58 podcast chain needs the microphone, an XLR cable, an interface or mixer, closed-back headphones, a stand or boom arm, and recording software. Add a quiet room with soft furnishings and you have everything required. Our first studio checklist walks through the order to buy things in, and our guide to improving podcast audio shows how to get the most from the room.

Who should buy it, and who should skip it

Buy it if you record in an untreated room, speak close to the microphone, and own or plan to buy an interface or mixer with enough clean gain. Skip it if you want the simplest possible plug-and-play setup, or if you need the extended high-frequency detail of a condenser.

Frequently asked questions

Does the Shure SM58 need phantom power?

Dynamic microphones generally do not need phantom power, unlike most condenser models. Check the manufacturer’s documentation to confirm for your exact model.

Do I need a pop filter with the SM58?

The SM58 has a built-in spherical pop and wind filter. Many people still speak slightly off-axis to reduce plosives, and some add a foam cover.

Is the SM58 better than a condenser for podcasting?

Not better in every case. A dynamic microphone often suits untreated rooms because it picks up less room noise, while a condenser can sound more detailed in a quiet treated space.

Build a Better Studio. One Upgrade at a Time.

Get practical equipment guides, studio tips, and new product recommendations delivered to your inbox.

We will only use your email to send the newsletter. Unsubscribe at any time.