How to Embed Audio in SDI Video with the Blackmagic Audio to SDI 2

Video · October 11, 2026 · 4 min read

What it means to embed audio in SDI

SDI carries video, and it can also carry audio inside the same cable. This is called embedded audio. When you embed audio in SDI, a mixer or microphone feed travels with the picture to the next device, so you need one cable instead of two and the sound stays locked to the video. Our SDI vs HDMI guide explains why professionals favour SDI for long, reliable runs.

The Blackmagic Design Mini Converter Audio to SDI 2 on our site is a dedicated audio embedder. This article uses its listing to explain what such a device does and what to check.

What the listing documents

The listing describes a converter that integrates up to 4 channels of balanced analog audio or 8 channels of AES/EBU digital audio into any SD, HD or 3G-SDI video feed. It offers automatic format switching, a redundant backup SDI input, and support for video formats up to 1080p60 and 2K. Connections include two SDI inputs (main and redundant backup), one SDI output, and four 1/4-inch jacks for balanced analog or AES/EBU digital audio.

When you would use an audio embedder

Typical cases include a live show where the sound comes from a mixing desk but the video travels over SDI to a switcher or recorder. Rather than feeding audio separately and risking sync problems, you embed the desk’s output into the video so both travel together. It is also useful when a camera has poor audio inputs but a good external feed is available.

Analog or digital audio inputs

Analog balanced inputs suit most small studios and churches, where the mixer outputs analog audio. AES/EBU is a digital audio format common in broadcast facilities. The listing says the converter accepts either, so you can match your existing gear. Check the connector type and cable you need, because the converter uses 1/4-inch jacks rather than XLR. Our article on XLR cables and balanced audio explains why balanced connections matter over long runs.

The redundant SDI input

A standout feature in the listing is the redundant backup SDI input, which switches automatically if the primary feed fails. For live events, that is useful insurance: if one cable or source drops out, the converter moves to the backup. You still need a second source or cable to benefit from it, so plan the wiring in advance.

Limits to check

The listing is clear that this model has no Ultra HD or 4K support and requires the separate Audio to SDI 4K model for those formats. It is also an audio embedder only, so it does not scale or convert video formats. If you need to change resolution or connection type, add a converter from our converters category.

Remember that embedding does not fix poor audio. Set levels properly at the mixer first, as described in our guide to setting up a mixer.

A simple example workflow

Imagine a small venue with an SDI camera feeding a switcher, and a mixing desk handling the microphones. You connect the desk’s stereo output to the audio inputs of the embedder, connect the camera’s SDI output to the embedder’s SDI input, and send the embedder’s SDI output on to the switcher. The video now carries the mixed audio with it, in sync, through the rest of the chain.

Remember that embedded audio needs correct levels. Set the mixer’s output carefully, and check the meters on the receiving device so you do not overload the input.

Before you buy

List your video format and the audio type your mixer outputs. Confirm that your connectors match, and that the video does not exceed the supported formats. If you also need conversion, see our converters category. If you only need to bring analog video into SDI, the analog to SDI guide describes another way to embed audio.

Quick buying checklist

List the video format your system uses, the audio source and its connector type, and where the embedded signal needs to go. Check that the converter supports your video format, count the audio channels you need, and plan for redundancy if the show is critical. Include spare cables and power, and test the full chain well before the event.

Who should consider it

It suits SDI-based workflows in churches, event venues and small studios where audio comes from a separate desk. If your whole chain is HDMI and USB, you probably do not need one.

Frequently asked questions

How many audio channels can the Audio to SDI 2 embed?

The listing states up to 4 channels of balanced analog audio or 8 channels of AES/EBU digital audio.

Does it support 4K video?

No. The listing says there is no Ultra HD or 4K support and points to a separate 4K model.

Does it convert video formats?

No. It is described as an audio embedder only, with no scaling or cross-conversion.

Build a Better Studio. One Upgrade at a Time.

Get practical equipment guides, studio tips, and new product recommendations delivered to your inbox.

We will only use your email to send the newsletter. Unsubscribe at any time.