SDI to USB Capture Card: How to Stream and Record from SDI Cameras
Live Streaming · October 11, 2026 · 4 min read
A capture card from SDI to USB is required for connecting the SDI camera to the computer, where a professional SDI signal will be recorded and broadcast in a UVC/UAC webcam signal format, which will be usable with any software supporting it, including OBS, Zoom, and Teams. However, a question that could remain unanswered is how to broadcast and capture SDI cameras.
So, if you’re looking to do that, then continue reading this article.
Key Features of SDI to USB Capture Cards
When considering capture cards, such as the UC1118, check out these essential features:
- Type-C USB 3.0: Supports high-speed, uncompressed video transfer to a laptop or desktop, without a performance drop.
- 1080p60 maximum resolution: Delivers uncompressed YUY2 video up to full HD at 60 frames per second for smooth motion.
- Native UVC and native UAC support: No manual driver to install; your computer sees the card as a webcam.
- Dedicated audio line-in: Connects external audio input (such as soundboards or mixers) and enables blending of it directly into the video signal.
Resolution, Format, and Compatibility Considerations
- Uncompressed YUY2 video: Saves video without the need to compress it in any heavy compression steps that can compromise the quality of the video.
- Ceiling limits: Compact cards such as the UC1118 do not support 4K workflows; if you need ultra-high-definition, upgrade to a card with 4K capabilities.
- Camera output resolution and frame rate: It would be wise to ensure that you purchase a capture card that is compatible with your camera’s SDI output in terms of frame rate and resolution.
- HDMI conversion requirements: If using standard HDMI consumer cameras, then you will need an active HDMI-to-SDI converter if the camera is an SDI-only type of capture card.
Audio Options and Synchronization
- Embedded SDI audio: Convey both picture and audio signals via a single SDI cable for easier cable management.
- Professional line-in support: Supports independent audio inputs from professional soundboards/mixing consoles.
- Lip-sync verification: Always test your audio and video streams together during rehearsals to ensure they remain perfectly synchronized.
Where the Capture Card Fits in Your Workflow
- Single-camera system: Use your SDI camera directly as an input signal on the capture card and plug the capture card into an available computer USB port.
- Multi-camera setups: Connect multiple cameras to a hardware switcher (e.g., ATEM Television Studio HD8) and then output the program to the capture card.
- Signal monitoring: Supports splitting of the SDI signal using an SDI to HDMI converter so that the preview monitor can be displayed without latency.
Quick Buying Checklist
- Camera compatibility: Verify SDI grade, resolution, and frame-rate output of your camera.
- Card specs: Max. resolution, max. frame rate, USB port speed supported.
- Software support: Make sure it is compatible with your operating system and streaming platform of choice (OBS, Zoom, Teams).
- Backup cables: A spare SDI cable and USB 3.0 cable should also be considered as backup hardware in case anything fails on the live production day.
Troubleshooting a Missing Video Feed
- Verify physical connections: Make sure the SDI cable is properly clicked and in place on the camera and card.
- Test port speeds: Connect the capture device to a dedicated USB 3.0 port; don’t use an external USB hub that isn’t powered by the computer.
- Conflict with release device: Applications or video conferencing that are already open in the background may have taken the capture feed.
- Restart software: Reopen your streaming software after connecting the hardware to refresh device detection and driver handshakes.
Conclusion
Using an SDI-to-USB capture card is the simplest, most reliable way to bring high-definition broadcast video into your laptop or PC. By delivering uncompressed 1080p60 video with zero driver hassle, standard UVC/UAC compatibility ensures you can jump straight into OBS, Zoom, or Teams and go live in seconds. Whether you are building out a single-camera streaming rig or integrating multi-camera hardware switchers into your workflow, choosing the right capture and conversion gear keeps your live productions rock-solid.
Ready to elevate your live video setup? Explore the full range of SDI capture cards, converters, and professional streaming gear at Better Broadcast today!
FAQs
Do SDI capture cards need drivers?
No, standard cards use UVC/UAC protocols, so your computer recognizes them instantly like a standard webcam.
Can this card capture 4K video?
No, portable SDI-to-USB cards (such as the UC1118) are typically capped at a maximum of 1080p60
Does it work with Zoom and Teams?
Yes, any UVC-compliant capture card works seamlessly with OBS, Zoom, Microsoft Teams, and other major video conferencing apps.