Professional Podcast Studio

A realistic guide to building a multi-host podcast studio with hands-on mixing, monitoring and a multi-camera video pipeline.

Built for: Established shows, multi-host podcasts and video podcasts

Equipment list

This guide is for shows that have outgrown a single microphone: two to four people in the room, hands-on control of the sound, and video that looks as good as the audio. It follows the order a real studio is built in. Get the room and audio right first, then add video, then add the switching and monitoring that keep a multi-camera show under control.

Step 1: Plan the format and the layout

Decide how many people will speak at once, whether remote guests will join, and whether you will publish audio only, video, or both. Sketch the room: where each person sits, where the cameras go, and where the control position is. In a small team, the producer often sits at the mixer and watches the monitor; in a larger one, a separate director handles the video.

Write down every signal that has to move: each microphone into the mixer, the mixer to the recording computer, each camera to the switcher, the switcher to the computer, and any return feeds to guests. A simple diagram on paper prevents expensive mistakes.

Step 2: Prepare the room

Choose the quietest, softest room you have, and add soft furnishings before buying panels: heavy curtains, rugs and bookshelves help, and our guide to improving podcast audio without gear explains the principle. Turn off or move noisy equipment. If the computer sits in the room, place it away from the microphones or use long cables so it can sit in a different space.

Check each seat with a clap test: a ringing flutter means the room is reflective. Fix reflections around each host and behind the cameras first.

Step 3: Choose and place the microphones

For untreated rooms and several hosts at one table, dynamic microphones such as the Shure SM58 are a sensible choice because they pick up less of the room and limit bleed from neighbouring hosts. A condenser such as the MAONO PM320S kit can sound detailed in a quiet, treated room but needs 48V phantom power and picks up more of the surroundings. Our dynamic vs condenser guide explains the trade-offs.

Give every host a boom arm rated for the microphone’s weight, and position each microphone close to its speaker. Keep microphones as far from each other as the layout allows, since the closer they are, the more each one picks up the other host’s voice. Read choosing a microphone boom arm before you buy.

Step 4: Wire the audio chain

Connect each microphone to its own channel on a mixer using balanced XLR cables. Label every cable at both ends. Our guide to XLR cables and balanced audio covers cable quality and routing. Connect the mixer’s USB output, if it has one, to the recording computer, or use an audio interface between the mixer and the computer.

Switch on phantom power only for channels with condenser microphones, and only after the microphone is connected. Keep audio cables away from power cables, and cross them at right angles if they must meet.

Step 5: Set gain and balance the mix

Follow the routine in our guide to setting up a mixer for a multi-host show. Set all faders to their nominal position, have each host speak at normal volume, and adjust each channel’s gain until peaks are healthy and never clip. Engage the low-cut filter on speech channels to remove rumble. Mute channels that are not in use.

Record each host on a separate track if your mixer and software allow it, because a separate track lets you fix one voice without affecting the others. Also record the main mix as a backup.

Step 6: Set up monitoring and mix-minus

Every host needs closed-back headphones, and all need to hear themselves and each other. If the mixer has too few headphone outputs, add a headphone distribution amplifier so each host controls their own volume. Never monitor through speakers while microphones are live, or the sound will feed back.

For remote guests, build a mix-minus feed so they hear everyone except themselves. On most mixers you do this with an auxiliary send, routing the guest’s incoming audio to a channel and leaving that channel out of the aux mix that goes back to them. Check the manual for your mixer’s exact routing.

Add studio monitors for editing, placed in an equilateral triangle with your head and with tweeters at ear height. Our guide to choosing studio monitors for a small room explains placement.

Step 7: Add lighting and cameras

Light every host with a soft key light placed slightly above eye level and to one side, with a fill and a back light as space allows. Our three-point lighting guide explains the layout, and our lighting category lists options. Match colour temperature across all lights and set each camera’s white balance manually.

Choose cameras with a clean HDMI or SDI output and a way to stay powered during long sessions. Our webcam vs mirrorless guide explains the trade-offs. A common layout is one wide shot of the table plus a close-up camera for each host.

Step 8: Build the video pipeline

With several cameras you need a switcher. The ATEM Television Studio HD8 has eight 3G-SDI inputs, four chroma keyers, two downstream keyers and a built-in control panel, according to its listing. Its inputs are SDI, so HDMI cameras need converters. Our SDI vs HDMI guide explains when to convert, and our converters category lists options.

To watch every camera at once, use a multiviewer. The MultiView 16 monitors up to 16 SDI sources on one screen. Our multiview explainer and multiviewer guide cover layouts and limits.

Send the switcher’s output into your recording computer. For SDI, the UC1118 SDI to USB capture card captures up to 1080p60 over USB 3.0 and is limited to that resolution, as explained in our SDI to USB capture card guide. If you need to show an SDI feed on an HDMI monitor, the Micro Converter SDI to HDMI 12G converts in one direction.

If the mixer’s sound should travel with the picture over SDI, the Audio to SDI 2 embeds up to four analog or eight AES/EBU channels; see how to embed audio in SDI. To copy one camera to several destinations, use the SDI distribution amplifier, explained in our distribution amplifier guide.

Step 9: Prepare the computer and software

Your recording or streaming computer needs enough processing power and the right ports. Our guide to choosing a computer for streaming and recording explains CPU, hardware encoding, memory and storage. Disable sleep, automatic updates and notifications on a dedicated machine, and set your software scenes in advance.

Step 10: Rehearse and write a run sheet

Run a full rehearsal with every host, a remote guest if you use one, and the video pipeline running. Record it and watch it back. Check for hum, echo, level differences between hosts, camera focus and exposure, and audio and video sync.

Write a one-page run sheet for the production: who sits where, the order of power-up, the mixer settings to start from, and what to do if a camera, microphone or the network fails. Keep spare cables, a spare microphone and spare headphones within reach.

Troubleshooting

  • One host sounds thinner or quieter. Adjust gain on that channel, check the distance to the microphone, and confirm the microphone type suits the room.
  • The audio is out of sync with the picture. Add a fixed audio delay in your software, or embed the audio into the video feed so both travel together.
  • The multiview or monitor shows no picture. Check cables, confirm formats and frame rates match what each device accepts, and check that converters have power.
  • Remote guests hear echo. Check the mix-minus routing so their own channel is excluded.

Videos to watch

Short tutorials that go with the steps above. These open on YouTube.

Where to spend first

A professional studio is built in layers. Fund the audio first (microphones, mixer, headphones, room), then monitoring, then lighting and a single good camera, and only then a multi-camera switching pipeline. Prices change often, so check current prices on Amazon, and confirm that every video device supports the formats your cameras output before ordering.

Upgrade options

  • Add acoustic panels at the first reflection points once soft furnishings have taken you as far as they can.
  • Add a headphone distribution amplifier so each host controls their own headphone volume.
  • Add an audio embedder such as the Blackmagic Audio to SDI 2 if you want the mixer's sound to travel with the video over SDI.
  • Add an SDI distribution amplifier to send one camera to the switcher, a recorder and a monitor at the same time.
  • Add a second computer to record or stream, so a crash does not end the show.