Radio Studio

A realistic guide to building a community or online radio studio: on-air desk, broadcast-style microphones, monitoring and a reliable signal chain.

Built for: Community radio, online radio and church or campus stations

Equipment list

A radio studio is built around one idea: a presenter must be able to run a live show confidently, with the microphone, music, callers and monitoring all under their hands, and with nothing that can fail unexpectedly. This guide builds a small community or online radio studio step by step, starting with the on-air position.

Step 1: Define how the studio will be used

Decide whether the presenter works alone (“self-op”) or with a producer, whether guests join in the studio or by phone or internet, and whether you broadcast to FM, to the internet or to both. Also decide whether the show will be seen as well as heard, because visual radio adds cameras and lighting.

Write a signal list: presenter microphone, guest microphones, music and jingles from the computer, phone or internet callers, and headphone and speaker outputs. Every item must have a channel on the mixer or a route to the computer.

Step 2: Choose the room and treat it

Pick a quiet, small, soft room. Small rooms are easier to control than large ones, and soft furnishings, heavy curtains, carpet and bookshelves absorb reflections. Keep the room away from noisy equipment, corridors and road noise, and put the computer and any fans where the microphone cannot hear them. Our guide to improving audio without buying gear explains simple room fixes.

Plan the layout so the presenter faces the mixer and computer comfortably, with the microphone in front or just to one side, and guest seats arranged so each person has their own microphone.

Step 3: Choose the microphone and mount it properly

Broadcast-style microphones are usually cardioid dynamic models used close to the mouth. The Shure SM58 on our site is a handheld cardioid dynamic with a built-in pop filter; it suits speech and is widely used for vocals. Our article on what a broadcast microphone is explains the design, the proximity effect and what the microphone needs from your mixer.

Mount each microphone on a boom arm so the presenter keeps a steady distance during a long shift. Check the arm’s weight rating and clamp the arm to a solid desk. Read choosing a microphone boom arm before buying. Train presenters to speak into the front of the microphone at a consistent distance.

Step 4: Set up the desk

A mixer with faders is the heart of the on-air desk. Faders are quicker and more precise than knobs when you are speaking and operating at the same time. Look for separate headphone and monitor outputs, mute controls on each channel, and either USB audio or outputs you can feed to an interface.

Connect the microphone to its channel with a balanced XLR cable and label it. Connect the computer’s output to a stereo channel for music and jingles. If you add a phone or internet caller, use an auxiliary send to build a mix-minus so the caller hears the show without their own voice. Our guide to setting up a mixer for a multi-host show walks through gain setting, headphones and mix-minus.

An important broadcast feature is monitor muting: when the microphone is open, the studio speakers should mute so they do not feed back into the microphone. Check that your mixer has a suitable control, or mute the speakers by hand every time the microphone goes live.

Step 5: Connect the broadcast computer

The computer runs the playout software and, if you stream, the encoder. Feed the mixer’s main output into the computer through USB or through an audio interface such as the Behringer MIC500USB, after checking its inputs and gain against your needs. Our guide to a computer for streaming and recording explains what matters: reliable hardware, enough memory and storage, and wired Ethernet.

Use a dedicated machine for broadcasting if you can. Disable sleep, updates and notifications, and keep the system tidy so nothing unexpected appears on air.

Step 6: Set up monitoring

Presenters need closed-back headphones so the microphone does not pick up the monitoring. Provide one pair per presenter and a spare. Our guide to closed-back vs open-back headphones explains why closed-back models suit live work. Use wired headphones, because wireless models can add delay.

Add studio monitors for off-air listening, and place them in a triangle with the listening position, as explained in choosing studio monitors for a small room. Remember to mute them whenever a microphone is live.

Step 7: Set levels and add processing

Set the microphone gain so the presenter’s normal speech peaks comfortably below clipping, and ask them to read at their natural volume. Then balance the music against the voice so the voice stays clear. Consistent loudness is a mark of professional radio.

A processing chain of a compressor, equaliser and limiter keeps voices steady and prevents overload. You can start with simple software processing and move to dedicated hardware later. Apply it gently, because heavy processing makes voices sound unnatural.

Step 8: Add visual radio (optional)

If you want to show the studio on video, add a camera, a key light and a way to bring the picture into your streaming software. If your cameras output SDI, the Audio to SDI 2 can embed the desk’s audio into the video feed, as explained in how to embed audio in SDI, and the UC1118 capture card can bring the SDI picture into a computer at up to 1080p60. See our SDI to USB capture card guide for details.

Step 9: Rehearse and plan for failure

Run a full dry-run show: open the microphone, play music, take a caller, switch headphones, and mute and unmute the speakers. Record it and listen back. Check levels, noise and any sound leaking from the headphones.

Write a simple on-air checklist and keep it by the desk. Include a plan for failure: spare cables, a spare microphone, a spare pair of headphones, a backup playlist and a procedure if the computer or network fails. Record your output locally in addition to streaming it.

Troubleshooting

  • Feedback or howling. A speaker is live while the microphone is open. Mute the monitors or turn them down.
  • The voice sounds boomy. The presenter may be too close to a directional microphone. Move back slightly and keep the distance consistent.
  • Music is louder than speech. Rebalance the faders and set a standard fader position for music beds.
  • Dropouts in the stream. Use wired Ethernet, check upload speed against your platform’s bitrate, and close other applications.

Videos to watch

Short tutorials that go with the steps above. These open on YouTube.

Where to spend first

Radio is about reliability, so spend where failure would take you off air: the microphone and boom arm, a mixer with proper faders and monitoring controls, closed-back headphones, and a dependable computer. Add monitors, processing and visual-radio video later. Prices change often, so check current prices on Amazon.

Upgrade options

  • Add a hardware or software audio processor chain (compressor, equaliser and limiter) so voices stay consistent.
  • Add a second studio position or a guest microphone with its own channel and headphone feed.
  • Add a backup computer or backup playout so a crash does not take you off air.
  • Add a camera and lighting for visual radio, using our YouTube Studio and Professional Podcast Studio builds as a guide.